| Front Panel: |
|
RF In: 'F', female, 75 ohm impedance, RF from CATV system, iCC-Net control |
|
RF Out: 'F', female, 75 ohm impedance, RF to TV |
|
Low-loss internal tap - less than -1.5 dbmV loss |
|
Net LED: Green LED for iC-Net bus and DC power, flashes once per second if active |
|
RS-232: DB-9 male connector, baud rates from 1200 to 115,000 baud |
|
Optional CC-232 RS-232 available to match specific makes and models |
|
Tx LED: Red LED lights when RS-232 information is sent |
|
Rx LED Yellow LED lights when RS-232 information is received |
|
Power In: 2.1mm coaxial jack (inside center conductor positive), 75 mA maximum
11.5 to 16.5 VDC, 12 VDC typical (may be unregulated) |
|
DIP Switches: Located on bottom of unit, sets RS-232 code operation and device number |
|
Current Control Codes: |
|
LG - Commercial TVs, older prosumer |
|
NEC - M,P,S,V,X-AVT series TVs |
|
Samsung - MD, ME, H series commercial TVs |
|
Samsung Ex-Link - Channel commands up to 63 |
|
Sharp - Many prosumer TVs |
|
Sunbrite - Power and channel control, no volume commands |
|
ICC-Net: |
|
Operation: 1-way control, carried over the same RF coax connection as TV channels |
|
Data Receive: Mid-band VHF, 74.7MHz, sent from IC Head-End Network Controller , -25 to +35 dBmV signal level |
|
Additional Specs: |
|
Size: 5.5" [140mm] wide x 1.1" [28mm] high x 3.4" [86mm] deep |
|
Weight: 8 oz [226g] |
|
Enclosure: All aluminum with durable black powder coat paint |
|
Mounting: Mounts rear of display |
|
Included Accessories: 18" RF Loop cable, Space-saving 12 VDC 500 mA digital switching power supply (North American shipments only), Mounting Velcro for unit |
|
Warranty: 3 Years |