| Front Panel: |
|
IR: IR sensor |
|
Status: Red/Green status LED |
|
Control: Menu, Up, Down and Select buttons for on-screen text setup menus |
|
Back Panel: |
|
Ethernet and Web page: RJ-45 100M Ethernet connector IP addresses for control and streaming |
|
Service: Female USB-A port for memory stick HD processor updates, accepts USB memory stick for local media file playback |
|
HDMI: HDMI Type A, 4K/HD video and digital audio, version 1.3 (4K 60 4.2.0/1080p/1080i/720p/480p) |
|
Audio: Simultaneous HDMI, SPDIF Optical, and Stereo |
|
Digital Audio SPDIF: Optical output, AC-3/AAC/PCM/Variable PCM 44 KHz/44.1 KHz |
|
Analog Audio Out: Stereo RCA audio, Mono, Stereo, variable level |
|
Control: see below |
|
Ethernet: RJ-45 100M Ethernet connector |
|
Supports IC-Net protocol and device ID for DHCP or static control, compatible with ICE-HE-DXL, Display Express software and custom control systems |
|
RS-232: DB-9 male for display control, supported by internal control type library |
|
I/O: 3.5mm stereo jack for CC-USB Power Sense cable, future I/O applications |
|
IR In: 3.5mm stereo jack for wired IR or optional IR-RS IR Remote Sensor |
|
Sleeve= DC power (GND) |
|
Ring= IR data signal |
|
Tip= DC 5V power+ from power jack input |
|
IP: PoE at 6 watts
Power In: 2.1mm coaxial jack (inside center conductor positive) .5A maximum, 11 to 14 VDC, 12 VDC typical |
|
Captioning: On-Screen: Displays on-screen digital captioning on all video ports |
|
Captioning Data: HDMI ports do not have the ability to carry captioning data |
|
Decoding: |
|
Accepts UDP and RTP Ethernet streams |
|
Decodes MPEG2 or H.264 Video over IP streams with AC3, MP1/2, or AAC audio |
|
Supports single program (SPTS) and multiple program (MPTS) transport streams |
|
On-board closed caption decoder support EIA-708 and EIA-608 embedded closed captioning |
|
Additional Specs: |
|
Dimensions: (HWD): 7.25" [184mm] wide (7.85 [200mm] including wings) x 1.150" [29mm] height x 3.6" [91mm] deep |
|
Weight: 13 oz [369 g] |
|
Enclosure: Aluminum with black powder coat paint |
|
Mounting: Screws through mounting flange or hook and loop tape |
|
Power: Po# 6W, or 11-14 VDC at 500 mA max |
|
Included Accessories: Mounting wings, hook and loop tape |
|
Warranty: 2 Years |