Front Panel: |
Menu Setup with front panel Select and Directional buttons |
Menu LCD, Blue with 2 lines of 20 white characters each |
Back Panel: |
Power: 2.1mm coaxial jack (inside center conductor positive) |
1.1A maximum, 11.5 to 13.5 VDC, 12 VDC typical |
EAS: 3 GPI Pins for latching control, SW(NO) for closure, V+ 5-12 VDC, Ground |
Ethernet: RJ-45 GigE Ethernet connector for IP control, updates, Unicast or Multicast IPTV, and internal Web page |
SDI: One BNC Female input |
SD-SDI @ 270Mb/s, HD-SDI @ 1.485Gb/s, 3G SDI Level A @ 2.970Gb/s |
Coax cable auto-equalizer for SD up to 460m, HD up to 230m (RG6) |
3G Resolutions 1080p at 50/59.94/60Hz, 1080psf24/23.97, HD 1080i at 25/29.97/30Hz, 720p at 59.94/60Hz, or SD 480i at 29.97Hz |
Video Format YCbCr 4:2:2 |
Accepts SDI embedded Stereo/AC-3 48/44.1KHz audio |
Widescreen option for 480i |
HDMI (non-HDCP): One HDMI 1.4a input, up to 1080p, as well as, various computer graphics resolutions |
Composite Video/CC Inputs: RCA female (480i), 29.97Hz, supplies Line 21 captioning |
Audio Inputs: Two coax SPDIF digital audio inputs |
Analog: Two stereo 3.5mm inputs |
Inputs assignable to video inputs |
RF: 'F', female, 75 ohm impedance |
Agile, channels 2-135 (57-861 MHz), standard, HRC, or IRC spacing |
6 MHz bandwidth fits any open channel without interference to adjacent channels |
1 KHz resolution, +/- 30 ppm accuracy, +/- 35 ppm stability |
29 dBmv typical output power, attenuated in 5 steps, approx. 4 dB |
Encoding: |
MPEG2/H.264 Profile: MP@HL for HD, MP@ML for SD |
1080i, 720p, 576i, 480p, and 480i output resolution |
MPEG2 Video Encoding bitrate 10-20 Mbps, HD, 5-6 Mbps 480i, variable bitrate if set for IP output only |
H.264 Video Encoding bitrate 5-10 Mbps, HD, 2-4 Mbps 480i, or variable bitrate if set for IP output only |
Converts PCM or MPEG1, Layer 2 audio to stereo AC-3, AAC or MP12, pass-through AC-3 |
SAP Dual-language capability, second audio track is MPEG1, Layer 2 |
Dual encoders can stream a simultaneous MPEG2 or H.264 QAM MPTS stream and separate IP SPTS streams, or one encoder can process an MPEG2 stream for QAM, and the second can process an H.264 IP stream |
Scaling: |
Dual hardware scalers |
Accepts 480i 1080p video and various computer graphics resolutions |
Edge to edge presentation with zoom, shrink and X/Y axis positioning |
Native or scales to fixed output resolution, 1080p scaled to 1080i |
Modulation: |
Switchable 64/256 QAM, J83 Annex B, Interleaving Modes (128,1) |
MER 38 dB typical |
Additional Specs: |
Dimensions: 8.5" [216mm] wide x 1.73" [62mm] height (1RU) x 6.0" [153mm] deep |
Weight: 1.5 lbs [0.68kg] |
Operating Tempurature: +32 to 122 F |
Rack mounting for one or two units side-by-side with included RKU or optional RK1 & RK2EZ |
For HRF Half-Racks, use the RK2EZ kit to mount each modulator |
Fan cooled, with variable speeds |
Included Accessories:PS12-2 Switching power supply, 2A 12VDC, standard AC cord for power strips
RKU, Universal Rack Mount Kit |
Warranty: 2 Years |