| Audio Inputs: |
|
Stereo: Stereo 1/8" jack, unbalanced, 7.5K ohms impedance, 1.4 V RMS max |
|
Mono Inputs 1 and 2: Two Mono 3.5mm jack, unbalanced, 7.5K ohms, 1.4 V RMS max |
|
Programmable for input level and ducking gating, timing, and mute levels |
|
Gain Potentiometer: Adjusts volume in normal operation |
|
DIP switches on bottom of 232-AMP interact with Gain for field setup of stereo and mono inputs |
|
Operation: Master volume commands affects Stereo only |
|
Audio Outputs: |
|
Speakers: 5-pin captive-screw terminal for stereo speaker installation, 8 or 4 ohm |
|
Watts 18 VDC: 32W RMS (16W per channel) @ 8 ohms, 40W RMS (20W per channel) @ 4 ohms |
|
Watts 12 VDC: 16W RMS (8W per channel) @ 8 ohms, 30W RMS (15W per channel) @ 4 ohms |
|
Gain: Max gain 20 db (default), programmable to 26, 32, or 36 db |
|
THD + Noise: 0.25% typical |
|
Response: +/-1 dB, 20 Hz to 20 kHz, 1 watt output |
|
Crosstalk: >65 dB @ 1 kHz, >58 dB @ 20 kHz |
|
Protection: Thermal and short-circuit protected, auto-recovery |
|
Control: |
|
5-pin captive-screw terminal |
|
RS-232: GND, TX and RX |
|
Signal (Sig)- future IR input |
|
Power (V+): 18/12 VDC output to tuner or accessory |
|
DIP switches on bottom of 232-AMP interact with Gain for field setup |
|
Additional Specs: |
|
Size: 5.5" [140mm] wide x 1.1" [28mm] height x 3.5" [86mm] deep
7.7" [196mm] wide with SMA bracket |
|
Weight: 8 oz [226g] |
|
Enclosure: All aluminum with durable black powder coat paint |
|
Mounting: Mount to CR tuner with optional SMA bracket, mount alongside CR tuner in RK-1, or rack-mount in RK3 rack kit |
|
Standards: RoHS compliant and energy-efficiency meets new California standards |
|
Power LED: Green LED lights when DC power is active |
|
Power In: 2-pin Captive Screw Terminal |
|
3 A maximum @ 18 VDC, 11.5 to 19 VDC, 18VDC typical |
|
Included Accessories: 12 VDC 4 A digital switching power supply (North American shipments only), Two 5-pin captive screw terminals |
|
Warranty: 2 Years |